JIANGSU HENGSION ELECTRONIC S&T CO.,LTD
|
Place of Origin: | Zhejiang, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Non-Condensing Analogue Video Optical Transceivers
2V↑1D↓(rs485)
2-Channel Video +1 Reverse rs485 Data Fiber Optic Transceiver
Module No.:
Transmitter: DDT-E-T0201DSF
Receiver: DDT-E-R0201DSF
Standard Products:
Single mode, single fiber, 20 km, FC
Multi mode, single fiber, 2 km, FC
Remarks: Our product adopts modular design, it support customization, you can add kinds of signals in by customization.
Introduction
HENGSION Digital Non-Condensing Video Optical Transceivers can simultaneously transmit 1-128 channels of 8 bit/10 bit composite video signals, reverse or bidirectional data(Rs485/232/422), unidirectional or bidirectional audio, Ethernet, Telephone, dry contact, E1 signals over one multimode or single-mode optical fiber……
The video optical transceivers are typically used in applications with fixed or PTZ cameras. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environments. It is now widely used in security monitoring and control system, highway, Traffic Control Photographic System, automation and intelligent residence etc.
The function of network management is optional, and the running status of the system can be monitored by inserting just one network-managing card.
Features
8 / 10 bit digitally encoded and non-compression video transmission
Available for monitoring the running status of the system with the LEDs indicating parameters status of power, link and video
Directly compatible with NTSC,PAL,SECAM CCTV camera systems and support RS232, RS485, RS422, and Manchester code
Transmission distance can reach 120km without relay in single mode
Industrial-level design with SMT techniques
Special ASIC design & Hot-swap function
Support no-damage regenerative trunk of video
Without electro-magnetic RF(radio frequency) and terrestrial current disturbances. Interfaces are under thunder and lightning protection
Stand-alone type or card-type installed in 19"2U, 4U or 5.5U rack-mount chassis
Network management functions are optional
Support customization and OEM
Typical Application
Benchmarks:
Fiber Interface | |
Connector | FC/ SC/ ST/ LC optional |
Wavelength | single-mode 1310nm/1550nm, multi-mode 850nm/1310nm |
Transmission power | ≥-9dBm |
Receiving sensitivity | -34dBm(bit error rate<10 -12) |
Transmission distance | single-mode max 120km, multi-mode max 2km |
Video | |
Number of Channels | 2-Channel Video |
Video InputOutput Impedance | BNC 75Ω |
Video standard | PAL/NTSC/SECAM |
Quantization | 8/10 bit |
Video InputOutput Voltage | 1.0VPP (Typical value) |
Video InputOutput Voltage | 1.5VPP (Maximum Value) |
Band width per channel | ≥6.5 MHZ |
Differential Gain | DG < 1% (Typical value) |
Differential phase | DP < 1° |
SNR(Signal to Noise Ratio) | ≥67dB /71dB(Weighted Value) |
Data | |
Electrical interface | RS232/RS422/RS485(2/4line)/ Manchester code |
Communication rate |
RS232 115.2Kbps/ 300Kbps / 2 Mbps |
RS422 115.2Kbps/ 300Kbps / 2 Mbps | |
RS485 115.2Kbps/ 300Kbps | |
Bit Error Rate (BER) | <10 -12 |
Physical interface | RJ-45,European terminal |
Electrical & Mechanical | |
Power Input | AC 100240V,AC/DC1248V optional |
Direct-current Output | DC 5V@2A |
Power Protection | Overvoltage Protection, Over-current Protection |
Power Consumption | < 3W |
Size(Standalone) | 142 ×109 ×28mm |
Environment | |
Working Temperature | -30 +70 |
Working Humidity | 095% (Non-condensing) |
Reliability | |
Mean Time Between Failures | 100,000 hours |